TCS Cushion Base Coat
Surface Preparation: Surface must be cleaned entirely of dust, dirt and debris. Repair of surface defects, depressions and cracks should be completed prior to application. All repairs must be flush and smooth to adjoining surfaces for optimum results. New asphalt must cure 30 days and new concrete must cure 28 days, prior to application of all TCS sport surfacing systems. Concrete surfaces should have a medium broom finish or similar roughened texture. TCS Concrete Primer shall be applied on properly prepared concrete prior to application of TCS Court Resurfacer with sand.
On concrete surfaces, ensure:
• No curing compounds are used
(except for water-based acrylic curing compounds)
• A vapor barrier and good perimeter drainage is installed to prevent
moisture accumulation beneath the court surface.
• Surface is acid etched with muriatic or phosphoric acid, after the 28 day
cure period, and rinsed well prior to application of TCS Coating System.
Mixing Procedures: Mix materials to a smooth uniform consistency with a drill mixing paddle, or other similar method. The following mix designs are based on 10 gallons of TCS Cushion Base Coat for ease of calculation:
TCS Cushion Base Coat .........10 gallons
Water.......................................3 gallons
Application: Apply with a soft rubber squeegee. Allow each application to thoroughly dry before applying next coat. Three coats of TCS Cushion Base Coat followed by two coats of TCS Cushion Top Coat are standard. Additional coats may be applied for increased resiliency and cushioning.
Coverage: Yield calculations are based on undiluted gallons of TCS Cushion Base Coat and vary according to surface texture and porosity:
.15 gallons per square yard per coat (.45 for 3 coats).
Drying Time: TCS Cushion Base Coat dries in 3-5 hours under optimum drying conditions. Low ambient or low surface temperature, shade, and high humidity increase drying time.
Clean Up: Wash tools in water before material dries.
VOC: This material contains less than 150 grams of volatile organic compounds per liter.
TCS Cushion Top Coat
Surface Preparation: Surface must be cleaned entirely of dust, dirt and debris. Repair of surface defects, depressions and cracks should be completed prior to application. All repairs must be flush and smooth to adjoining surfaces for optimum results. New asphalt must cure 30 days and new concrete must cure 28 days, prior to application of all TCS sport surfacing systems. Concrete surfaces should have a medium broom finish or similar roughened texture. TCS Concrete Primer shall be applied on properly prepared concrete prior to application of TCS Court Resurfacer with sand.
On concrete surfaces, ensure:
• No curing compounds are used
(except for water-based acrylic curing compounds)
• A vapor barrier and good perimeter drainage is installed to prevent moisture accumulation beneath the court surface.
• Surface is acid etched with muriatic or phosphoric acid, after the 28 day cure period, and rinsed well prior to application of TCS Coating System.
Mixing Procedures: Mix materials to a smooth uniform consistency with a drill mixing paddle, or other similar method. The following mix designs are based on 10 gallons of TCS Cushion Top Coat for ease of calculation:
TCS Cushion Top Coat .......... 10 gallons
Water....................................... 3 gallons
Application: Apply with a soft rubber squeegee. Allow each application to thoroughly dry before applying next coat. Three coats of TCS Cushion Base Coat followed by two coats of TCS Cushion Top Coat are standard.
Additional coats may be applied for increased resiliency and cushioning.
Coverage: Yield calculations are based on undiluted gallons of TCS
Cushion Top Coat and vary according to surface texture and porosity: .10
gallons per square yard per coat (.20 for 2 coats).
Drying Time: TCS Cushion Top Coat dries in 2-4 hours under optimum drying conditions. Low ambient or low surface temperature, shade, and high humidity increase drying time.
Clean Up: Wash tools in water before material dries.
VOC: This material contains less than 150 grams of volatile organic compounds per liter.
Caution: KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN. Do not take internally. If swallowed, call a physician immediately. In case of contact with eyes, flush immediately with water for 15 minutes and call a physician. Do not apply when rain is imminent. When not in use, keep container tightly closed and upright to prevent leakage. Do not store in direct sunlight or above 100 ºF. In case of spillage, absorb and dispose of in accordance with Federal, State and Local regulations.
Warranty: The statements made on this label are believed to be true and accurate and are intended to provide a guide for approved application practices. As workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Tennis Court Supply warrants only
that the material conforms to product specifications and any liability to the buyer
or use of this product is limited to the replacement value of the product only. In
no event shall tennis court supply be liable for any injury, loss or damage, either
direct or incidental, special or consequential, however arising in connection with material or equipment furnished or work performed. Tennis Court Supply shall not, in any manner, be liable for any defects, variations or change in condition in the
substructure over which its products are installed.
