Center Court 8 Fixture Extruded Series Tennis Court Lighting System
The housing and door frame are constructed of extruded aluminum. The flat tempered glass lens is sealed in place and a one-piece door gasket is provided for weather tight protection. ETL listed for wet locations.
Made with a state of the art high performance reflectors that use high gloss components to achieve precise photometric distributions. The fixture is a full cut-off light fixture and is Dark-Sky Friendly in a level horizontal position only.
Available in 1000W standard metal halide and pulse-start metal halide. Comes standard with a 4KV pulse rated mogul base socket. Each 60HZ CWA multi-tap, 480V, or 5-tap ballast is pre-wired and installed for convenience. 50HZ ballast available upon request.
The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 55,000 PSI and conforms to ASTM A500 grade C requirements. The shaft construction is a single piece of formed steel welded longitudinally. The hand hole is located 1’ 6” above the pole base. A ground lug is provided standard.
The anchor base is fabricated from a structural quality hot rolled carbon steel plate that has a minimum yield strength of 36,000 PSI. The anchor base telescopes the pole shaft and has
a circumferential weld on the top and bottom.
A full base cover is provided which encapsulates the base plate and anchor bolts to provide a clean transition from pier to pole.
Standard mounting options include single, Davit Arms. Additional mounting options may be available for custom applications.
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility.
Standard colors available: Black, US Green. Custom colors available upon request.
Click for Court Layout and Luminaire Schedule
, then use back button.
PULSE-START VS. TRADITIONAL PROBE START METAL HALIDE LIGHTING
Pulse-start and probe-start lamps use a different ballast system. Traditional probe-start metal halide lamps do not use an genitor and require three electrical contacts to ignite the gas and remain lit. Newer pulse-start metal halide lamps use only two contacts and use an igniter located inside the ballast pod. The benefits are substantial.
Pulse-start fixtures/lamps offer several benefits:
- Longer Life: Up to 50% longer life reducing maintenance & replacement cost
- Higher Efficacy: As much as 24% more lumens per watt saving energy and money
- Rapid Restrike Time: Less that half the time to re-light when shut down
- Better Color Rendition: Superior an more stable color rendering as lamps are
- Less Color Variance: Lamps throughout the area appear to be the same color
- Quick Startup: Ful brightness in 2 to 4 minutes instead of 5 to 10 minutes
- Superior Lumen Maintenance: About 14% less lumen deprecation means more light